XJTAG 3.13 allows the Layout Viewer to be run as a standalone application. If the Layout Viewer application is selected in the installer it will be installed alongside the other applications in the XJTAG test suite. […]
XJDeveloper 3.13 includes an improved user interface for categorising power/ ground nets. It is important to identify any power, ground or termination reference nets before attempting to test a board. Failure to do so can result in incorrect test results or even board damage. XJDeveloper attempts to identify these nets to simplify this process. [...]
XJTAG 3.12 adds the ability to rotate the layout viewer. This can be useful in situations where it is difficult to rotate the physical board under test. To rotate the layout view use the ‘View’ menu and then select ‘Rotation’. […]
XJTAG 3.10 adds a control that allows the default values of XJEase global variables to be overridden. In XJDeveloper, clicking on ‘Options’ at the bottom of the test list on the Run Tests screen now includes a Set Global Variables tab: […]
Configuration variables in XJTAG allow settings to be configured for a device. For example the address of an IIC device may need to be defined. Configuration variables are associated with a test device file, and in previous versions of XJTAG were only available in device files from the XJEase library. From XJTAG 3.9 configuration variables [...]
XJTAG 3.8 includes a new Layout Viewer. With similar functionality to the previous layout viewer, the new viewer contains a number of improvements. […]
Alongside other improvements to the XJRunner test setup, XJTAG v3.5 has a new interface to specify bus access from the test system using the XJRunner Setup screen. When you edit a test there is now a Bus Access tab on the dialog, which allows full control of which pins are used to read and/or write [...]