Request a Demo

Improve your board test and debug process, XJTAG can speed up your design and development as well as providing excellent test coverage in production.
Request a demonstration of the XJTAG suite of test tools today

FREE board setup

FREE board setup
/ Tag:Netlist

Using XJTAG without netlists

XJTAG is a great system for board designers and manufacturers, but people looking to repair boards often do not have  netlists for those boards – something that until now has been essential to start an XJDeveloper project. […]

By |Categories: Features, XJDeveloper|Tags: , , |

Don’t use EDIF netlists

One of the many netlist formats that XJTAG supports is EDIF 2, an open data exchange format that is widely supported. EDIF stores both netlist and schematic data, but XJTAG only uses the netlist data. It often seems like the obvious choice of format to export from your CAD tool to use in XJTAG. However, there are a number of problems that we have come across with EDIF netlists: […]

By |Categories: Support, XJDeveloper|Tags: , , |

Netlist Formats

In versions of XJTAG prior to 2.0, the system supported just four netlist formats: RINF, EDIF 2, PADS PCB and Protel. The parsers for these netlists were written carefully against specifications for the formats where possible, and so should reliably parse all valid netlists in those formats. […]

By |Categories: XJDeveloper|Tags: , , |