Welcome to the XJTAG blog
We believe that sharing our knowledge will help you get the most out of your XJTAG system. This is where our development and support team share their insights and experience. You’ll find posts highlighting particular features of the different software packages that make up the XJTAG development system or aspects of the XJEase language.
Above all this blog is for YOU. We’d love to hear your feedback and suggestions for topics.
Just click the button above and let us know!
XJTAG version 3.8
A new major version of XJTAG – version 3.8 – is now available from our website for users who are in maintenance. […]
Using the Analyser screen to debug initialisation issues
The blog article ‘Debugging Connection Test – part 1 (Updated)’ discusses how to use ‘Debug Connection Test’ to identify a missing disable value. However, if a disable value is set to the wrong value, i.e. low rather than high, then it could prevent the Debug Connection Test from running at all. In this case, XJDeveloper’s Analyser screen can be used [...]
Test Summary Report
In XJTAG 3.7, XJDeveloper can now generate a new style of DFT report. The Test Summary Report can be found via the DFT Reports menu item within the Tools menu, or in the Reports menu on the DFT Analysis screen (as are the other DFT reports) and contains up to four sections: […]
Setting the Rules for Suggesting Unfitted Devices
With XJDeveloper 3.7 the user now has more control over how unfitted devices are suggested. The Unfitted Rules Dialog allows for the specific suggestion methods to be enabled or disabled, allowing for more accurate unfitted device suggestions. […]
Custom BOM fields
Previously, when importing BOM information users were limited to making assignments from a selection of pre-defined BOM fields. With XJDeveloper 3.7 users can now define custom BOM fields. […]
More options for importing BOM information
The Bill of Materials, or BOM provides valuable information about the components in a netlist. This information is often key for project setups and, when available, is used by XJDeveloper to make project setup suggestions. This information is often taken from a separate BOM file or straight from a board’s netlist. With XJDeveloper 3.7 the volume of BOM data extracted [...]