Microsoft Defender has an optional feature called Controlled Folder Access, which is designed to protect sensitive folders from being modified by malicious software. This feature is not switched on by default and is only available if you are using Microsoft Defender Antivirus or Microsoft Defender for Endpoint; if you’re using a third party antivirus solution [...]
A diff is a comparison showing differences between the contents of files. This article is specifically about displaying the difference between the a project’s current version of an XJEase library file, and the latest version of that file available from the library that it belongs to. […]
With XJTAG 3.11 we’ve made some improvements for working with projects that use the Dynamic Chains feature. Previously, the Analyser, Debug Connection Test, and the Chain Debugger feature would always use the default profile for your project. Using a different profile for these features would require you to manually change the default profile in XJDeveloper. [...]
In XJTAG 3.11 we’ve added configurable oscillator functionality which can be used on any XJLink2-based controller. The oscillator operates independently of TCK, so can run when TCK is not running and can be set to any frequency from 10 kHz to 166 MHz (in 10 kHz increments) regardless of the current TCK frequency. [...]
One new feature in XJTAG 3.11 is the ability to filter the formatted log files in the File List of the Log File Viewer based on a variety of different criteria. […]
Historically we have provided three mechanisms for defining some form of constant or default values for a pin/net in XJDeveloper. These are BSDL compliance pins, bus disable values and constant pins, which allow you to define pins which XJTAG should keep in a constant state during automated testing, such as with Connection Test. However these [...]
XJTAG 3.11 introduces support for the ARM Serial Wire Debug (SWD) protocol in XJEase using our XJLink2-based JTAG controllers. Reading and writing with the SWD protocol is made simple using two new XJEase functions SWD_READ and SWD_WRITE. They handle the transfer of data on the bidirectional data connection, keeping the code in XJEase clean and [...]
With XJTAG 3.11 we’ve made a few improvements to the .NET XJRunner integration and our LabVIEW VIs. […]
The second part in this 2 part series about the new user libraries feature in XJDeveloper 3.11 will explain how user libraries are useful in XJDeveloper. When devices are categorised using library files (as opposed to using files saved on disk) you can re-use these library files in other XJDeveloper projects with ease and all [...]
A Bill Of Materials (BOM) can be added to a board by importing from the netlist, from a suitable schematic file, or from a separate BOM file. […]